• Ball and needle bearing construction for more efficient performance
• Muffled handle exhaust for quiet operation
• Reversing valve and variable speed trigger
• 1/2″ chuck

Product Description
Model/Stock #: JSM-724 Reversible: Yes Free Speed (RPM): 800 Chuck Size (in): 1/2 Horsepower (HP): 1/2 Overall Length (in): 7 1/2 Net Weight (lbs): 4… More >>

Jet JSM-724 1/2-Inch Pneumatic Drill

• Two piece D-31 motor for power and efficiency
• All metal gear transmission for smooth, efficient power
• Shift lock drive instantly changes from drill to driver
• 2.6 Ah Ni-MH batteries for greater capacity and longer run time
• Includes (2) 14.4V Ni-MH batteries, multi-voltage charger and case

Product Description
M Force variable speed reversing with 2 gear selection. 0 to 400 RPM and 0 to 1300 RPM. 2 piece, high performance motor with dual ball bearings. All metal gear transmission to withstand extreme demands. 18 torque settings in both high and low speed. 3 8″… More >>

• Reconditioned Milwaukee Products have a One Year Limited warranty through the Milwaukee factory or an authorized service center
• Designed for drilling between joist, studs, in tight corners, or in close quarters
• 0-355 rpm on low, 0-750 rpm on high, and 0-500 rpm with right-angle drive removed
• Trigger speed control for precise applications

Product Description
SPECIFICATIONS Milwaukee 3107-8 1/2 Inch Right Angle Drill; Voltage — 120 AC; Chuck Size — 1/2 inch; Amps — 7.0; RPM w/RAD — 0-350/0-750 RPM; No Load Speed — 0-500 RPM; Chuck Type - Keyed; Gear Train - Quadruple; Cord Type — 8 ft. Quick-Lok; Construction type - Grounded; Spindle Lock - No; Length — 16-3/4 inches; Tool Weight — 10.3 lbs.; Shipping Weight 16.5 lbs; The Milwaukee 3107-8 Includes: Carrying Case, RAD Assemble, Side Handle, 9/16 inch Open End Wre… More >>

• Two piece D-31 motor for power and efficiency
• All metal gear transmission for smooth, efficient power
• Shift lock drive instantly changes from drill to driver
• 2.6 Ah Ni-MH batteries for greater capacity and longer run time
• Includes (2) 14.4V Ni-MH batteries, multi-voltage charger and case

Product Description
M Force variable speed reversing with 2 gear selection. 0 to 400 RPM and 0 to 1300 RPM. 2 piece, high performance motor with dual ball bearings. All metal gear transmission to withstand extreme demands. 18 torque settings in both high and low speed. 3 8″… More >>

• 1/2″ All Metal Singel Sleeve Ratcheting Chuck
• Drill Speed (RPM): 0-450/0-1,700
• Blows per Minute: 0-29,000
• Max Torque: 550 in-lbs peak torque
• Includes: 2602-20 M18 Cordless 1/2¿ Hammer Drill / Driver, (2) XC High Capacity LITHIUM-ION Batteries, M18 Charger and Carrying Case

Product Description
The Milwaukee M18 cordless 1/2in. Hammerdrill/Driver not only delivers an industry-leading compact and ergonomic design, but is up to 20% faster in concrete than the competition. In addition, the 2602-22 is the only hammerdrill/driver in its class with an all-metal gear case, providing maximum durability for heavy duty applications. Max. Torque (in.-lbs.): 450, Volts: 18, Speed - No Load (RPM): 0 - 500/0 - 1,700, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Set… More >>

• Reconditioned Bosch Products have a One-year warranty through the Bosch factory or an authorized service center
• Lightweight Design - perfect for small diameter drilling applications
• 7 AMP Motor - provides the highest performance to weight ratio in its class
• 360 Degree Auxiliary Handle w/Built-in Quick Release Depth Gauge - provides wide range of movement along with consistent drilling depth
• Compact Design - Aggressive impact mechanism in combination with a more powerful motor outperforms the competition

• 4X life in rebar and 40% more life in concrete than competitive full head carbide bits
• Faster drilling speed versus 2 cutter
• Less Carbide Wear than 2 cutter means an end user is more productive with a single bit
• Solid tungsten carbide head with four cutter geometry - extraordinary lifetime and high drilling speed in concrete and concrete with rebar - No jamming when hitting rebar - Optimized for heavy duty rotary hammers
• Stress Optimized flute surface and geometry - For fast dust removal, high power transmission, and optimized stress behavior, no overstraining.

• Extra long 8′ rubber cord with 3-prong grounded plug
• 360° auxiliary handle with optional depth gauge
• 767 in-lbs. Torque
• 8 foot rubber cord w/ grounded plug

Product Description
Variable speed reversing trigger control, 0 550 RPM. 8.0A. Ball and needle bearing construction. High torque, triple reduction gearing for large holes. Heavy duty chuck with ground and hardened jaws. Includes: 360 auxiliary handle and chuck key. Available… More >>

Bosch 1034VSR 8 Amp 1/2-Inch Drill

• Pistol grip 1/2-Inch variable speed with reverse drill
• 10.0-Amp motor delivers increased performance
• 0-1,200 rpm speed with reversing switch
• Soft grip handle and two-finger trigger
• 360-Degree. locking side handle

Product Description
10.0A motor delivers increased drilling performance. 0 to 1200 RPM, variable speed reversing switch for increased versatility. Soft grip handle and 2 finger trigger for increased comfort. 360 locking side handle with soft grip for greater control and versatility. 1 2” all metal single sleeve ratcheting keyless chuck with automatic spindle lock provides greater bit retention and tool free convenience. 90 day money back guarantee and 3 year limited warranty…. More >>

• Features 0-475/0-2,050 RPM and 30,750 BPM. 650-Inch Pound of torque
• Features Bosch durasheild housing and uni-body power train to withstand real world conditions
• Bosch litheon batteries - state-of-art lithium-ion battery technology coupled with Bosch’s proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditions
• 1/2-Inch metal chuck for increased durability
• LED Light is great for dark or enclosed areas