If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!
- 5-piece left hand drill set includes 1/8, 3/16, 1/4, 5/16 and 3/8 inch diameters
- Removes broken or twisted common screws and bolts
- Indispensable if you don’t want to drive the screw through the hole
- Perfect drill to make pilot holes for screw extractor
- 135 degree high speed steel
Product Description
Designed to extract broken screws and bolts. High speed steel, 135 point. Set includes 1 each of: 1 8″, 3 16″, 1 4″, 5 16″, and 3 8″ bits…. More >>
- 13-piece left hand drill set includes sizes 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 inch diameters in steel index storage box
- Removes broken or twisted common screws and bolts
- Indispensable if you don’t want to drive the screw through the hole
- Perfect drill to make pilot holes for screw extractor
- 135 degree high speed steel
Product Description
Designed to extract borken screws and bolts. High speed steel, 135 point. Set includes 1 each: 1 16″ thru 1 4″ bits…. More >>
- Works like a Yankee Screwdriver–Yankee is a registered trademark of the Stanley Works Co
- Includes 6 1-inch insert bits with storage holder
- Eazyload quik disconnect 1/4-inch hex screwdriver accessories bit holder
- Ratchet switch for clockwise and counter-clockwise screwdriving and drilling operation
- Ratchet switch locks for manual operation
Product Description
This is a brand new contractor grade push/pull drill - driver by Eazy Power Corp. It is as solid as they come and can be used for both drilling and driving screws. When you need the personal touch on a project - this is the tool!The tool has an extended length of 12″ and a compressed length of 9.5″Versatility and ReliabilityAll manualNo wires to trip onNo batteries to go deadUse all 1/4″ hex shank accessories including:Screwdriver insert bits and power tipsHexbits… More >>
- Makes all sds drills more versatile
- Allows use of locking steel keyless chuck, 1/2-Inch-20 unf thread to sds, to utilize any standard shank drill bits 1/16-Inch-1/2-Inch sizes and accessories
- Use #3 phillips screwdriver to secure chuck with left-hand thread screw
- Isomax contractor quality
Product Description
2″ in length Simply use #3 phillips screwdriver to secure chuck with provided left-hand thread screw Item# 30205… More >>
Eazypower 30205 1/2-Inch SDS Drill Chuck Adapter 20-UNF Thread
- Turns any drill into an angle drill.
- Fits into drill chuck like you would use a drill bit.
- Use in hard to reach areas with drill bits, wire brushes, polishers and grinding discs.
- Completely sealed, never needs lubricating.
- Not for use in hammer drills.
Product Description
90°ree. Angle Drill Attachment, Complete With Jacobs 3/8″ Chuck, Lubricate Grease Fitting In Gear Box For Long Life & Trouble Free Operation, Tighten As Drill Bit Into Existing Chuck, Simple To Use, Never Remove Chuck From Drill To Put On Attachment, Double Blister…. More >>
